Rebuildable Tank Atomisers

RTA is short for Rebuildable Tank Atomizer.  These rebuildable atomizers have a tank system on top of (or around) your build deck, which means that juice can constantly be fed onto your coils and cotton. 

The air holes on these decks are arranged differently on each atomizer, with larger intake gaps found either at the top or bottom of the atomizer.

The build deck on an RTA is normally surrounded by a metal casing, sealing it off from your eliquid and creating something called a chimney and bell system. In short, this system allows a vacuum to form, which helps feed your wick with e-juice and keeps your vapor concentrated when you inhale.  

You can see evidence of the vacuum by looking out for a release of bubbles (inside your tank) after you’ve inhaled.

An RDTA combines the RDA and RTA into a single atomizer.  

The build deck for these atomizers is most commonly found on top of the tank, with the tank acting as a deep juice well. This takes away the need to drip every few hits, but the possibility is still there.  

RDTAs don’t have a bell and chimney system, meaning your juice might soak up a bit slower and your vapor will be slightly more dispersed.  In all honesty, with the introduction of squonk mods in the vaping industry, RDTAs have become somewhat obsolete since squonk mods not only have bigger juice bottles but also give better flavor than an RDTA.

Rebuildable Tank Atomisers

Juggerknot V2 28mm | RTA By QP Design 28mm Diameter deck Dual coil No leaking Post less deck Clip top cap (fast and easy filling) Side installed screws (No coil twisting) Adjustable Top airflow (with stopper) New deck design (More airflow + Flavor) Triple channeled airflow to the coils Airflow to...
Vaperz Cloud has been known for pushing the limits in blending the vape quality of Drippers and Tanks with each variation of RTA, specifically with the VCMT line of atomizers. The original VCMT came out and was one of the first RTAs that could handle the power of a series...
Features 24mm diameter 2.3mL standard juice capacity (3.5mL with included polycarbonate tank section 304 stainless steel, pyrex, and polycarbonate construction Postless four terminal deck Top-mounted Flathead screws Compatible with single coil configurations Dual wicking ports PEEK insulator Double O-ring retention Short, flavor-focused airflow path Dual adjustable bottom airflow slots 510...
The VCMT that was so beloved has returned new and improved. 30mm RTA - Stainless Steel Finish 2 post design with large post holes and beefy flat head screws. Massive bottom airflow with 4 adjustable airflow slots. Wicking channels built into the deck with 4 holes for juice flow make...
Designed for Use with Mesh Wire Dimensions: 2" x 15/16" (Including Drip Tip and Threads) 24mm Diameter 510 Threaded 2.0ml Capacity (4.0ml with Included Replacement Glass Tube) Dual Post Clamp Design with Four Screws Utilizes Clamp Post to Secure Mesh Wire Top Fill with Slide Out Design Leak Resistant Top...
From Augvape comes the Boreas V2 RTA is 24mm diameter rebuildable tank atomizer that can hold 2.7ml or 5ml of e-liquid with the help of a removable chimney adapter and extended glass section. The Boreas V2 is designed with an angled airflow inlet at the base of the tank that...
Spinner